Our Accu-Tab Ⓡ Tablets made of Calcium Hypochlorite are eroded to provide a residual of chlorine in your pool. For use in our Accu-Tab Ⓡ Chlorination System.

• Tablet form disinfectant and oxidizer, contains 65-75% available chlorine content, for commercial aquatic use. Includes scale inhibitor (SI).
• NSF Standard 50 listed.
• Available in #55 lb. pails.
• MUST be used in Accu-TabⓇ chlorination systems in order to maintain manufacturer’s warranty. Failure to do so may result in damage to equipment and/or serious bodily injury.
• Can only be sold in NC and SC.
• SKU: ACC-TAB
  

The tablets lower pH and are made of acid-based Sodium Bisulfate. If the pH rises above a set point, the Acid-Rite Ⓡ pH Adjustment System will kick on to release these tablets.

• Tablet form, pressed, for pH and alkalinity adjusting; NSF Standard 50 listed for approved use in swimming pools and spas.
• Available in #45 lb. pails.
• MUST be used in Acid-RiteⓇ pH adjustment systems in order to maintain manufacturer’s warranty. Failure to do so may result in damage to equipment and/or serious bodily injury.
• Can only be sold in NC and SC.
• SKU: ACD-RT
  

The liquid form product, Muriatic acid, lowers pH levels or lower your alkalinity.

• This is a strong acid used to reduce pH and total alkalinity, and clean scale or acid wash surfaces.
• Available in case of (4) 1 gal. bottles, and 15 gal. drums.
• SKU: MU-ACD

Typically known as conditioner or stabilizer, this is like putting sunglasses on your pool. It directly blocks UV rays so you don’t burn off your chlorine as quickly.

• Be cautious not to over-saturate your pool because then it could lock up your chlorine and render it ineffective. When it doubt, schedule us for some quick service.
• Granular form stabilizer and conditioner for outdoor bodies of water. Used to reduce UV effects resulting in loss of chlorine.
• Effective with all types of chlorine.
• Available in #100 lb. drums.
• SKU: CY-ACD
  

Our granular product, Calcium Hypochlorite, is typically used for shocking high elevations of chlorine.

• It is usually used if you’re getting high chloramines. For that, you would administer a high dose to burn off the organics.
• You can also use this if there’s a spill or accident in the pool and you need to throw granular on it for 30 minutes. It is used directly in the pool.
• Granular form of the product is a disinfectant and an oxidizer that contains 68% available chlorine content. Used to kill bacteria, destroy organic contaminants and control algae.
• Available in #50 and #100 lb. pails.
• SKU: CLC-HYP
  

Calcium Chloride is used to adjust the calcium hardness of your pool and it raises it.

• Plaster pools need a certain amount of calcium to give the chemicals something else to chew on, rather than your plaster.
• Flake form of the chemical, used to raise hardness of water in pool.
• Available in #50 bags.
• SKU: CLC-CHLR

This chemical, soda ash, is typically used to raise your pH if you overfeed your acid.

• Also, if you’re trying to lower your alkalinity and you’ve accidentally killed your pH, you can use this product to raise the pH.
• Water soluble powder used to raise pH and alkalinity.
• Available in #50 bags.
• SKU: SD-ASH

Sodium Bicarbonate, a target chemical, is used to raise your alkalinity and keep it within a certain range.

• Doing this helps stabilize your pH.
• This product is in powder form and is used to raise total alkalinity content with a small change in pH. It also makes pH level easier to maintain.
• Available in #50 lb. bags.
• SDM-BCR

Sodium Thiosulfate (Crystal) is a chemical used to lower your chlorine. Let’s say you shock your pool overnight but you know in the morning prior to opening, you’re going to have to lower it.

• This drops your chlorine quickly.
• Crystal form of the product is used to reduce chlorine in pool and spa water, and remove color-reducing effects of bleach in sample testing.
• Available in #50 lb. bags.
• SKU: SDM-THI